Eng. Hossam Kafafy
Technical Manager

PHONE: +20 102 9901867
EMAIL: tech@kitegy.com


KIT’S files of activities cover a broad spectrum of specialization in NDT services, Inspection services with strong emphasis in the following fields of expertise:



  • Quality Inspection of all engineering Disciplines
  • Ultrasonic Testing
  • Magnetic Particle Testing
  • Dye Penetrant Testing
  • Visual Inspection
  • Welders Inspection, Procedure Testing
  • Welder Performance Qualifications
  • Coating / Painting Inspection



  • Ultrasonic Testing
  • Magnetic Particle Testing
  • Dye Penetrant Testing
  • Visual Inspection
  • Land and Marine Pipeline Welding Inspection and NDT
  • On-Stream Wall Thickness Measurement and Surveys
  • Pipe Mill Surveillance Quality Control and / or NDT



  • Vendor Inspection (of manufactured & fabricated equipment)
  • Pre-Commissioning testing Inspection
  • Weld Engineering and Inspection
  • Assessment of Welder Performance
  • Laboratory Analysis of Materials and Mechanical Testing
  • Quality Control
  • Quality Assurance

Visual Testing (VT)
Visual testing (VT) is the oldest and most common nondestructive testing (NDT) techniques. It is typically the first step in the examination process to inspect a variety of product forms including castings, forgings, machined components and weld elements, according to the NDT Training & Test Center.

Liquid Penetrant Testing (PT)
This is a simple low-cost method of detecting surface-breaking flaws such as cracks, laps, porosity, etc. To be detected, the flaw must reach the surface to be tested.
Penetrant testing is one step up from visual inspection and offers many advantages, such as speed, large-area coverage and cheapness.

Magnetic Particles Testing (MT)
Magnetic particle Inspection (MPI) is a non-destructive testing (NDT) process for detecting surface and slightly subsurface discontinuities in ferromagnetic materials such as ironnickelcobalt, and some of their alloys. The process puts a magnetic field into the part. The piece can be magnetized by direct or indirect magnetization. Direct magnetization occurs when the electric current is passed through the test object and a magnetic field is formed in the material. Indirect magnetization occurs when no electric current is passed through the test object, but a magnetic field is applied from an outside source. The magnetic lines of force are perpendicular to the direction of the electric current.

Radiography Testing (RT)
In Radiography Testing the test-part is placed between the radiation source and film (or detector). The material density and thickness differences of the test-part will attenuate (i.e. reduce) the penetrating radiation through interaction processes involving scattering and/or absorption.

Ultrasonic Testing (UT)
Ultrasonic testing (UT) is a family of non-destructive testing techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.

Eddy Current Testing (ET)
Eddy current testing (ECT) as a technique for testing finds its roots in electromagnetismEddy currents were first observed by François Arago in 1824, but French physicist Léon Foucault is credited with discovering them in 1855. ECT began largely as a result of the English scientist Michael Faraday‘s discovery of electromagnetic induction in 1831. Faraday discovered that when there is a closed path through which current can circulate and a time-varying magnetic field passes through a conductor (or vice versa), an electric current flows through this conductor.

  • Magnetic Flux Leakage (MFL) Read More
  • Phased Array Ultrasonic  Test  (PAUT)
  • Acoustic Emission Test (AET)
  • ASME Section I
  • ASME Section II
  • ASME Section III
  • ASME Section V
  • ASME Section IX
  • ASME Section B31.1
  • ASME Section B31.3
  • ASME Section B31.8

Read More

  • API 510
  • API 570
  • API 578
  • API 653
  • Heat Treatment
  • Material Types
  • Crystal Structure
  • Mechanical Properties
  • Chemical Composition
  • ASME Sec II
  • ASTM Properties

Apply to The Course


For general enquiries, please contact us:

+20 101 200 0760

57 Dr Abd Allah El-Araby Street
Al Hay as sabea, Nasr City
Cairo, Egypt

Read more 


Head Office


Share This